How To Fix Wifi Connected But No Internet Connection In Laptops|Helpful Guide
You can fix the wifi connected but no internet connection problem in following laptops by following these methods:
Lenovo
ASUS
Acer
Dell
MSI
Samsung
Microsoft
Razer
HP(Hewlett-Packard)
Alienware
Acer Inc
IdeaPad
Fujitsu
GIGABYTE
AVITA
Acer Aspire
Elitebook
Honor
IBM
1. Restart/Reboot your Laptop
This step isn't always vital in case your connection difficulty is affecting a couple of devices.
As with many issues, Restarting/Rebooting your Laptop is the primary troubleshooting step you must strive.
If you are lucky, you would possibly remedy a few transient glitch with the aid of using restarting, as a way to restoration your community connection difficulty.
Most of this recommendation assumes you are the use of a Wi-Fi connection, on the grounds that they run into troubles extra often.
However, in case you hook up with your router with an Ethernet cable, you must additionally strive some other cable at the moment to verify that yours isn't always faulty.
2. Confirm other devices can't connect
Before troubleshooting, it's important to determine if your Laptop is the only device without an internet connection.
Grab your phone or another computer connected to your Wi-Fi network and see if you're online properly.
Try streaming a YouTube video or something similar to check.
On many versions of Android, you'll see an X icon over the Wi-Fi icon in your status bar and notice that you're connected to your cellular network for data.
iPhone and iPad users can go to Settings > Wi-Fi and verify that there is no Internet connection message under your network name.
If your computer doesn't connect but others do, it's probably just wrong settings on your Laptop.
However, if you don't have internet on all devices then the problem is with your network equipment and hence you can skip some of the following steps for Laptop only as indicated.
If the issue affects all of your devices, you should run a quick test before proceeding.
Disconnect the Ethernet cable connecting your modem to your router and use it to connect your Laptop directly to the modem.
If you can connect to the internet with these settings, the problem is with your router. after troubleshooting and can't find a solution to your problem, your router is probably defective.
3. Disable VPN Connections
Using a VPN can provide several benefits, but they also add a layer to your internet connection.
As a result, what you think is a problem with your home network connection could actually be a problem with your VPN.
Sometimes a VPN will time out if you're connected too long while your Laptop is idle, or you may be using an overloaded server that can't handle your connection.
If you're running a VPN, either through an app or a manual connection in Windows, disable it and try to get back online.
If that doesn't resolve the issue, leave the VPN off while troubleshooting to reduce the number of variables.
4. Restart your modem and router
Since most network problems affect your modem and/or router, a reboot makes sense.
While some routers offer the ability to reboot through an interface, you don't necessarily have to.
Just disconnect both devices and leave them. Unplug them for a few minutes or use the physical power button if available.
Plug in the modem first, let it boot up, and then plug your router back in.
Wait a few minutes for it to fully reboot.Make sure your router and modem are working properly.
If you don't see any lights on one of your devices, or the lights appear red or blink in an erratic pattern, you may have a defective part. network hardware.
If your computer still shows "no internet" after this, continue; Your problem is more complex than a basic reset.
Note that you are only resetting your computer, not restarting it. Default settings; You don't have to!
5. Run Windows Network Troubleshooter
This step is not necessary if your connection issue affects multiple devices.
If you're just having a problem with your Windows Laptop, there's probably something wrong with your computer's network settings.
Although the built-in Windows Troubleshooter doesn't usually fix any problems, it's worth trying before proceeding to more advanced steps.
To access the network troubleshooter in Windows 10, go to Settings > Network & Internet > Status.
Select Network Troubleshooter and follow the steps to see if Windows can fix the problem.In Windows 11, you can find the same tool under Settings > System > Troubleshoot > Other troubleshooters > Internet Connections.
6. Check your IP address settings
This step is not necessary if your connection issue affects multiple devices.
Next, you need to follow one of the most important steps in diagnosing network problems: confirm that your computer has a valid IP address.
On most home networks, under normal circumstances, the router provides an address to devices when they connect.
If your computer's IP settings are not correct, it can lead to this "no internet access" issue or even the "Wi-Fi does not have a valid IP configuration" error.
Check the IP setting in Windows 10
If you're using Windows 10, go back to Settings > Network & Internet > Status.
Click on the Change adapter options entry and then double-click on the connection used
Once you have opened a window with information about your connection, click on the Properties button.
Find Internet Protocol Version 4 in the list and double-click it. From there, make sure you have selected Obtain an IP address automatically and Obtain DNS server address automatically.
Manually setting an IP address is for advanced users; If you entered something here, it is probably not valid.
Click OK after telling both to use automatic values, then try to connect again.
Check the IP options in Windows 11.
If you are using Windows 11, open Settings again and go to Network and Internet. Click Advanced network settings at the bottom of the list, and then select the network connection you're using.
From the expanded list below, select Show more properties. In the menu that appears, ensure that IP mapping and DNS server mapping are set to Automatic (DHCP).
If not, click the Edit button next to these and change them to Automatic. Once you've confirmed this, try connecting again.
7. Check ISP's status
If you are unable to connect any devices to the internet at this point, you should check to see if your internet service provider (ISP) is having any problems.
While this is rare, it could explain why you don't have internet access at all.
Data connection to see if Comcast, Verizon, or other service providers in your area have reported outages.
DownDetector is an excellent site for this. A quick Google or Twitter search can reveal if others are having problems as well.
8. Try These Command Prompt Commands
This step is not necessary if your connection issue affects multiple devices.
Windows offers several network commands at the command prompt.
You need to run some of them if you don't already have Internet access in Windows.
To do this, type cmd in the Start menu, right-click on it and select Run as administrator to open an elevated Command Prompt window.
Use these two commands to restore some of the files Windows stores to access the internet:
netsh winsock reset
netsh int ip reset
If that doesn't work, try releasing your computer's IP address and getting a new one from the router with these two commands, one after the other:
iLaptoponfig /release
iLaptoponfig /renew
Finally, update your computer's DNS settings with this command
iLaptoponfig /flushdns
There's no harm in restarting your Laptop at this point. If you still don't have internet access, there are a few more steps to try.
9. Disable security software
Disable security softwareThis step is not necessary if your connection issue affects multiple devices.
Another rare but plausible scenario is that you have security software on your Laptop that is preventing you from accessing the internet.
Avast and other antivirus suites have had issues in the past where failed updates would crash some websites or even the entire internet for no good reason.
Disable any third-party antivirus apps you have installed and see if your connection recovers.
If this is the case, you may need to change the settings in your antivirus application or consider a workaround.
Speaking of security, it's worth running a malware scan with an app like Malwarebytes.
A malicious program may have interrupted your Internet connection.
10. Update your wireless drivers
This step is not necessary if your connection issue affects multiple devices.
Usually you don't need to update most of your computer's drivers as it can cause more problems than it's worth.
However, if you are still having this network connection problem, you should check for driver updates for your computer's wireless chip.
If you have a manufacturer update application (e.g. HP Support Assistant or Lenovo System Update) installed on your Laptop, open it and check for wireless driver updates.
11. Reset your network
If you've tried all of these steps and you're still having no internet but connected issue, there's not much you can do at this point except reset your network settings.
If your Windows Laptop is the only device that can't connect
You can reset your network settings in Windows 10 by going to Settings > Network & Internet > Status. Click on the "Reset network" text at the bottom of the screen and then click on "Reset now".
In Windows 11, go to Settings > Network & Internet, then click Advanced network settings and select Reset network.
Following the instructions in these menus will completely remove all network adapters and reset all network settings to default.
You'll have to set everything up from scratch, including the VPN software, but it might be just what you need.
If you can't connect to the Internet with any device at home, the best thing to do is to restart your router (and modem if you have one).
Locate a small hole on the back or bottom of your router and press and hold (with a paper clip or similar object) for a few seconds to factory reset it.
If there is no hard reset button, you will need to log into your router and perform a factory reset from there.
Set up and use factory settings to see if your can connect again.
If you still don't have an internet connection after doing this, you probably have a broken computer and need to get a replacement.
If something you own is still under warranty, contact the manufacturer.
Don't worry about "connected but no internet" anymore. Hopefully you won't have to perform a factory reset to fix your connection problem.
One of the steps above should take care of it, but there is no perfect formula for network problems.
If you follow all the steps, you have confirmed that your devices are configured correctly and nothing is blocking the connection.
Comments
Post a Comment